Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Pet Bunk Bed
This dog bed/cat bed/pet bunk bed plan is perfect if you have two pets that need a snuggly place to sleep.
- Difficulty
- Beginner
- Time
- 1.5–3 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 1 1/2" × 24" | — | ☐ |
| Platform Bases | 2 | 1/2" × 24" × 24" | — | ☐ |
| Sides | 6 | 2 1/2" × 24" × 24" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 1/2" Thick Quarter Sheet | 1 board | ☐ |
| Board, 2x2 96" | 1 board | ☐ |
| Board, 1x3 72" | 2 board | ☐ |
| Kreg Screws | 36 each | ☐ |
| Wood Glue | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools
- Drill / Driver
- Miter Saw
- Pocket Hole Jig
- Random Orbit Sander
- Table Saw
Instructions
1. Build two platforms
Build two platforms for your pets to sleep. Attach side railings to platform bases with Kreg pocket holes.
2. Attach Platforms Together
Attached the two platforms together with four legs and pocket holes.
3. Add Cushions
Add cushions or pet beds for your pets to sleep.
4. Get the FREE PDF plans
Get the full FREE PDF plans for the DIY pet bunk bed at https://www.charlestoncrafted.com/diy-pet-bunk-bed/
