NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling five-drawer dresser with mismatched-width drawer faces — a plywood carcass, Euro slides throughout, and a single inset door for the odd-shaped top-corner opening.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Case partitions | 3 | 3/4" × 15 3/4" × 24 3/4" | Plywood | ☐ |
| Case top | 1 | 3/4" × 15 3/4" × 29 3/4" | Plywood | ☐ |
| Small divider | 1 | 3/4" × 15 3/4" × 8 1/4" | Plywood | ☐ |
| Sides | 2 | 3/4" × 15 3/4" × 48" | Plywood | ☐ |
| Trim boards | 2 | 3/4" × 1 1/2" × 21 1/2" | Pine | ☐ |
| Trim boards | 2 | 3/4" × 1 1/2" × 29 3/4" | Pine | ☐ |
| Drawer box sides Cut to fit slides and measured openings. | 6 | 3/4" × 5 1/2" × 14" | Pine | ☐ |
| Drawer box sides (small) | 2 | 3/4" × 5 1/2" × 5" | Pine | ☐ |
| Drawer box fronts/backs (wide) | 4 | 3/4" × 5 1/2" × 27 1/4" | Pine | ☐ |
| Drawer box fronts/backs (narrow) | 2 | 3/4" × 2 1/2" × 14" | Pine | ☐ |
| Drawer box fronts/backs (narrow, tall) | 2 | 3/4" × 2 1/2" × 19" | Pine | ☐ |
| Drawer bottoms, small | 2 | 1/4" × 14" × 20 1/2" | 1/4" plywood | ☐ |
| Drawer bottoms, wide | 2 | 1/4" × 14" × 28 3/4" | 1/4" plywood | ☐ |
| Drawer bottom, top | 1 | 1/4" × 14" × 6 1/2" | 1/4" plywood | ☐ |
| Drawer faces, narrow | 2 | 3/4" × 3 1/2" × 21 1/4" | Pine | ☐ |
| Drawer face, top | 1 | 3/4" × 7 1/4" × 8" | Pine | ☐ |
| Drawer faces, wide | 2 | 3/4" × 7 1/4" × 29 1/2" | Pine | ☐ |
| Cabinet door | 1 | 3/4" × 15 3/4" × 24 1/2" | Plywood | ☐ |
| Cabinet back | 1 | 1/4" × 48" × 26 1/4" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet | 1 each | ☐ |
| Plywood, 1/4", 4x8 sheet Half sheet — drawer bottoms and backs. | 1 each | ☐ |
| Pine, 1x6, 8 ft | 1 each | ☐ |
| Pine, 1x6, 10 ft | 1 each | ☐ |
| Pine, 1x3, 8 ft | 1 each | ☐ |
| Pine, 1x4, 4 ft, 3-1/2" actual width | 1 each | ☐ |
| Pine, 1x8, 6 ft, 7-1/4" actual width | 1 each | ☐ |
| Euro-style bottom-mount drawer slides, 14" | 5 pair | ☐ |
| Caster wheels | 4 each | ☐ |
| Full-inset concealed hinges | 1 pair | ☐ |
| Edge banding Optional, for plywood edges. | 1 roll | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 6 oz | ☐ |
| Sandpaper, assorted grit | 6 sheet | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.