NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A fully upholstered parson-style dining chair built without cutting a single curved back leg, using straight 2x2 and 2x3 stock and a sewn slipcover.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Chair back sides, tall One end cut at 15°, measurement to long point. | 2 | 1 1/2" × 1 1/2" × 18 1/8" | Pine 2x2 | ☐ |
| Chair back sides, short One end cut at 15°, measurement to long point. | 2 | 1 1/2" × 1 1/2" × 15 3/8" | Pine 2x2 | ☐ |
| Chair back cross piece One end cut at 15°, measurement to long point. | 1 | 3/4" × 1 1/2" × 16 3/16" | Pine 1x2 | ☐ |
| Front apron | 1 | 3/4" × 1 1/2" × 14 1/2" | Pine 1x2 | ☐ |
| Back support | 1 | 1 1/2" × 1 1/2" × 14 1/2" | Pine 2x2 | ☐ |
| Back base support | 1 | 1 1/2" × 1 1/2" × 13" | Pine 2x2 | ☐ |
| Front legs | 2 | 1 1/2" × 1 1/2" × 16" | Pine 2x2 | ☐ |
| Front and back aprons | 2 | 3/4" × 2 1/2" × 14 1/2" | Pine 1x3 | ☐ |
| Base side rails One end cut at 15° off square, measurement to short point. | 2 | 1 1/2" × 2 1/2" × 13 1/2" | Pine 2x3 | ☐ |
| Base back rail Both ends cut at 15°, parallel to each other. | 2 | 1 1/2" × 1 1/2" × 16 9/16" | Pine 2x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x2, 8 ft | 2 each | ☐ |
| Pine, 2x3, 8 ft | 1 each | ☐ |
| Pine, 1x3, 8 ft | 1 each | ☐ |
| Pine, 1x2, 8 ft | 1 each | ☐ |
| Plywood scrap, 1/4" Or no-sag springs or jute webbing for the seat base. | 1 each | ☐ |
| Chair foam cushion, 15-1/2" x 17-1/2" x 2" | 1 each | ☐ |
| Foam batting, 1/2" thick | 1 yard | ☐ |
| Burlap | 1 yard | ☐ |
| Decorator-weight fabric | 1 yard | ☐ |
| Staples, 5/8" | 1 box | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.