NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A gap-top outdoor dining table on a pair of crossing X-shaped legs joined by a center stretcher — simple joinery, built for weather.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tabletop boards | 7 | 1 1/2" × 5 1/2" × 72" | Pine 2x6 | ☐ |
| Side aprons | 2 | 3/4" × 3 1/2" × 61 3/4" | Pine | ☐ |
| Apron ends Ends cut at 45°, long point to long point measurement. | 2 | 3/4" × 3 1/2" × 33 3/4" | Pine | ☐ |
| X-leg pieces Compound-angle both ends — measure and cut to fit your desired table height. | 4 | 1 1/2" × 5 1/2" × 26" | Pine 2x6 | ☐ |
| Leg trim pieces Finish caps over the leg screw holes. | 8 | 3/4" × 3 1/2" × 6" | Pine | ☐ |
| Center stretcher Measure and cut to fit between the two X's. | 1 | 1 1/2" × 1 1/2" × 36" | Pine 2x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x6, 12 ft | 3 each | ☐ |
| Pine, 2x6, 8 ft X-leg pieces. | 1 each | ☐ |
| Pine, 2x4, 8 ft | 1 each | ☐ |
| Pine, 2x2, 8 ft Center stretcher. | 1 each | ☐ |
| Pine, 1x4, 8 ft | 7 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Wood screws, 1-1/4" | 1 box | ☐ |
| Wood screws, 2" | 1 box | ☐ |
| Wood screws, 2-1/2" | 1 box | ☐ |
| Exterior wood filler | 1 can | ☐ |
| Sandpaper, assorted grit | 4 sheet | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.