Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Outdoor Serving Center
Take your outdoor entertaining up a notch with this rolling serving center.
- Difficulty
- Intermediate
- Time
- 8.8–17.5 hours
- Cost
- $$$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front Leg | 2 | 1" × 3" × 31" | — | ☐ |
| Back Leg | 2 | 1" × 3" × 29" | — | ☐ |
| Rail | 2 | 1" × 3" × 48" | — | ☐ |
| Support Post | 2 | 1" × 3" × 18" | — | ☐ |
| Cross Brace | 8 | 1" × 3" × 12" | — | ☐ |
| Axle Leg | 2 | 1" × 3" × 9" | — | ☐ |
| Axle Block | 2 | 1" × 3" × 9" | — | ☐ |
| Axle Support | 4 | 1" × 3" × 5" | — | ☐ |
| Narrow Long Side Slat | 6 | 3/4" × 1" × 52" | — | ☐ |
| Wide Long Top Slat | 7 | 3/4" × 3" × 52" | — | ☐ |
| Narrow Medium Side Slat | 2 | 3/4" × 1" × 33" | — | ☐ |
| Wide Medium Side Slat | 3 | 3/4" × 3" × 33" | — | ☐ |
| Narrow End Slat | 12 | 3/4" × 1" × 19" | — | ☐ |
| Wide End Slat | 12 | 3/4" × 3" × 19" | — | ☐ |
| Narrow Shelf Slat | 4 | 3/4" × 1" × 18" | — | ☐ |
| Wide Shelf Slat | 3 | 3/4" × 3" × 18" | — | ☐ |
| Narrow Lower Side Slat | 4 | 3/4" × 1" × 13" | — | ☐ |
| Wide Lower Side Slat | 2 | 3/4" × 3" × 13" | — | ☐ |
| Narrow Short Side Slat | 2 | 3/4" × 1" × 2" | — | ☐ |
| Wide Short Side Slat | 3 | 3/4" × 2" × 3" | — | ☐ |
| Top Side | 2 | 3/4" × 3" × 52" | — | ☐ |
| Top End | 2 | 3/4" × 3" × 19" | — | ☐ |
| Top Slat Support | 4 | 3/4" × 3" × 19" | — | ☐ |
| Top Track Support | 2 | 3/4" × 1" × 51" | — | ☐ |
| Narrow Top Slat | 3 | 3/4" × 1" × 51" | — | ☐ |
| Wide Top Slat | 4 | 3/4" × 3" × 51" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x2 96" | 19 board | ☐ |
| Board, 1x4 96" | 18 board | ☐ |
| Board, 2x4 96" | 5 board | ☐ |
| 1 1/4" coarse exterior pocket screws | 18 each | ☐ |
| 2 1/2" coarse exterior pocket screws | 64 each | ☐ |
| 1/16" x 3/4" x 72" aluminum angle | 4 each | ☐ |
| #8 x 5/8” sheet metal/lath screws | 10 each | ☐ |
| 1/2" x 24" threaded rod | 1 each | ☐ |
| #18 x 1 1/4" brad nails | 100 each | ☐ |
| 8" replacement lawnmower wheels | 2 each | ☐ |
| Chest cooler, 50-70 quart (up to ~19"x32"x16") | 1 each | ☐ |
| 6 1/4" (or similar) brushed-nickel bar pull | 1 each | ☐ |
| 10" (or similar) brushed-nickel bar pull | 1 each | ☐ |
| #8 x 1 1/2" sheet-metal/lath screws | 6 each | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.