NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A bar-height slat-top table on four straight legs with a single 45°-mitered X cross brace — the brace can skip glue if you want it to knock down.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side aprons | 2 | 3/4" × 2 1/2" × 32" | 1x3 | ☐ |
| End aprons and supports | 4 | 3/4" × 2 1/2" × 30 1/2" | 1x3 | ☐ |
| Tabletop boards | 9 | 3/4" × 3 1/2" × 33 1/2" | 1x4 | ☐ |
| Legs | 4 | 3/4" × 3 1/2" × 41 1/4" | 1x4 | ☐ |
| Long cross support Both ends cut at 45°, parallel to each other. | 1 | 3/4" × 3 1/2" × 46" | 1x4 | ☐ |
| Short cross supports One end cut at 45°. | 2 | 3/4" × 3 1/2" × 22 3/4" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x4 board, 10 ft (Pine) Tabletop boards. | 3 each | ☐ |
| 1x3 board, 8 ft (Pine) | 2 each | ☐ |
| 1x4 board, 8 ft (Pine) Legs and cross braces. | 3 each | ☐ |
| Self-tapping wood screws, 2" | 40 each | ☐ |
| Wood glue | 3 oz | ☐ |
| Wood filler or paintable silicone | 1 each | ☐ |
| Exterior paint | 1 quart | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.