NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A single chaise with a back that adjusts from flat to upright — hinged panel, prop bar, and stop blocks. The mechanism is three pieces of scrap and it just works.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Frame sides | 2 | 1 1/2" × 3 1/2" × 75" | — | ☐ |
| Frame crosspieces | 4 | 1 1/2" × 3 1/2" × 24 1/2" | — | ☐ |
| Legs | 4 | 1 1/2" × 3 1/2" × 11 1/4" | — | ☐ |
| Cleats | 2 | 1 1/2" × 1 1/2" × 27" | 2x2 | ☐ |
| Side slats | 2 | 3/4" × 3 1/2" × 78" | 1x4 | ☐ |
| Main deck slats | 6 | 3/4" × 3 1/2" × 48" | 1x4 | ☐ |
| Stop blocks Three angle positions as shown — add pairs for more. | 6 | 1 1/2" × 1 1/2" × 3" | 2x2 | ☐ |
| Back slats | 6 | 3/4" × 3 1/2" × 30" | 1x4 | ☐ |
| Back supports | 4 | 1 1/2" × 1 1/2" × 23 1/2" | 2x2 | ☐ |
| Prop supports | 2 | 1 1/2" × 3 1/2" × 10" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 10 ft Frame, legs, prop supports. | 3 each | ☐ |
| 2x2, 8 ft Cleats, back supports, and stop blocks. | 2 each | ☐ |
| 1x4, 8 ft All the decking and back slats. | 7 each | ☐ |
| Exterior hinges, 3" Two sets: back-to-frame, and prop-to-back. | 4 each | ☐ |
| Exterior screws, #9 x 2-1/2", self-tapping | 50 each | ☐ |
| Exterior screws, #8 x 2", self-tapping | 40 each | ☐ |
| Exterior wood glue | 4 oz | ☐ |
| Chaise cushion Standard chaise pads fit the 24-1/2" width. Not in the estimate. | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.