NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An entryway bench with cubby storage and an upper hutch, cut entirely from one sheet of plywood plus a little trim — a genuine exercise in efficient sheet-good layout.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bench top | 1 | 3/4" × 15 3/4" × 48" | Plywood | ☐ |
| Bench cubby dividers, small | 2 | 3/4" × 15 3/4" × 14" | Plywood | ☐ |
| Bench cubby dividers, low | 2 | 3/4" × 15 3/4" × 10 3/4" | Plywood | ☐ |
| Bench back | 1 | 3/4" × 15 3/4" × 46 1/2" | Plywood | ☐ |
| Bench footer trim | 3 | 3/4" × 2 1/2" × 46 1/2" | Pine | ☐ |
| Hutch sides | 2 | 3/4" × 7 3/4" × 36 1/4" | Plywood | ☐ |
| Hutch top | 1 | 3/4" × 7 3/4" × 46 1/2" | Plywood | ☐ |
| Hutch dividers Should be 33" long — cut to fit your actual hutch opening. | 2 | 3/4" × 7 3/4" × 33" | Plywood | ☐ |
| Hutch back header | 1 | 3/4" × 2 1/2" × 46 1/2" | Plywood | ☐ |
| Back panel | 1 | 1/4" × 48" × 48" | 1/4" plywood | ☐ |
| Hutch shelves | 3 | 3/4" × 7 3/4" × 15" | Plywood | ☐ |
| Hook mounting rails Attached to the back underside of each shelf so hooks move with the shelf when repositioned. | 3 | 3/4" × 2 1/2" × 15" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet | 1 each | ☐ |
| Pine, 1x3, 4 ft | 4 each | ☐ |
| Plywood, 1/4", half sheet | 1 each | ☐ |
| Caster wheels, with mounting plates | 4 each | ☐ |
| Edge banding, matching veneer, 3/4" | 1 roll | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Shelf pins | 8 each | ☐ |
| Hooks | 4 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.