Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
One Sheet Plywood Console
Build this stylish console table out of a single sheet of plywood!
- Difficulty
- Intermediate
- Time
- 4–7.8 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top | 1 | 3/4" × 16 1/2" × 61" | — | ☐ |
| Bottom | 1 | 3/4" × 14" × 58 1/2" | — | ☐ |
| Long Aprons | 4 | 3/4" × 2 1/2" × 53" | — | ☐ |
| Short Aprons | 4 | 3/4" × 2 1/2" × 9" | — | ☐ |
| Front, Back, Middle Legs | 6 | 3/4" × 3 1/2" × 32 1/2" | — | ☐ |
| Side Legs | 4 | 3/4" × 2 1/2" × 32 1/2" | — | ☐ |
| Curved Pieces | 24 | 3/4" × 3 1/2" × 3 1/2" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| 3/4-inch Wood Veneer Edge Banding | 1 each | ☐ |
| 1 1/4-inch Pocket Screws | 1 each | ☐ |
| 1 1/4-inch Brad Nails | 1 each | ☐ |
| 1 inch Brad Nails | 1 each | ☐ |
| Wood Glue | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.