NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A simple 1x-lumber stand sized to hold several guitars upright side by side.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Vertical leg supports | 2 | 3/4" × 5 1/2" × 28 3/4" | Pine 1x6 | ☐ |
| Base sides | 2 | 3/4" × 3 1/2" × 15" | Pine 1x4 | ☐ |
| Base cross pieces | 2 | 3/4" × 2 1/2" × 33 1/2" | Pine 1x3 | ☐ |
| Top rail / neck support stock | 2 | 3/4" × 3 1/2" × 35" | Pine 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine or cedar, 1x6, 6 ft (Pine) Cut into the two vertical leg supports. | 1 each | ☐ |
| Pine or cedar, 1x4, 6 ft (Pine) Line total for both boards. | 2 each | ☐ |
| Pine or cedar, 1x3, 6 ft (Pine) | 1 each | ☐ |
| Wood screws, 1-1/4" | 20 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.