NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-mounted coat hutch: two plywood sides, edge-banded, carrying a 1x6 hook rail and upper shelves. Part of a modular frameless collection.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 11 1/4" × 42" | 3/4" plywood | ☐ |
| Rail / shelf | 2 | 3/4" × 5 1/2" × 64 1/2" | 1x6 | ☐ |
| Front trim | 1 | 3/4" × 3 1/2" × 64 1/2" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 8 ft of 11-1/4" strip Sides. Front edge finished with edge banding. | 8 foot | ☐ |
| 1x6, 6 ft (Pine) Hook rail and shelf. | 2 each | ☐ |
| 1x3, 6 ft (Pine) Front trim (a 1x4 in the shown version). | 1 each | ☐ |
| Edge banding, 3/4" | 10 foot | ☐ |
| Pocket-hole screws, 1-1/4" | 25 each | ☐ |
| Coat hooks | 7 each | ☐ |
| Wood filler | 1 each | ☐ |
| Paint | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Iron for Edge Banding, Miter Saw, Table Saw. Materials: Plywood, 3/4", 8 ft of 11-1/4" strip, Edge banding, 3/4"
Rip the plywood into 8-ft strips 11-1/4" wide — a table saw is strongly preferred for a straight, clean edge; a rip jig works if that's what you have. Crosscut the pieces to length with a miter saw, then iron edge banding onto the front edges so no plywood plies show.
Tools: Drill / Driver, Pocket Hole Jig. Materials: 1x6, 6 ft, Pocket-hole screws, 1-1/4"
Drill 3/4" pocket holes on both ends of the 1x6 boards and along one long edge, then attach the 1x6s to the plywood sides. These form the hook rail and shelf.
Tools: Drill / Driver, Pocket Hole Jig. Materials: 1x3, 6 ft, Pocket-hole screws, 1-1/4"
Add the front 1x3 (or 1x4) piece with pocket holes to trim the front and stiffen the assembly.
Tools: Drill / Driver, Random Orbit Sander. Materials: Coat hooks, Wood filler, Paint
Install the pieces together — a tippy process, so have a second person help lift the upper shelves into place. Remember the hutch is not structural, so the upper shelves aren't for heavy loads. Fill, sand, paint, add the seven hooks, and mount to wall studs.