NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A single-seat chair and a matching ottoman, built from the same 2x4 frame recipe — push them together for a sectional, split them apart for extra seats.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Chair back legs | 2 | 1 1/2" × 3 1/2" × 23 1/2" | 2x4 | ☐ |
| Chair front legs | 2 | 1 1/2" × 3 1/2" × 12" | 2x4 | ☐ |
| Chair sides Build as a mirrored left/right pair, not two identical copies. | 2 | 1 1/2" × 3 1/2" × 23" | 2x4 | ☐ |
| Chair middle supports | 3 | 1 1/2" × 3 1/2" × 20 3/4" | 2x4 | ☐ |
| Chair seat deck slats | 6 | 5/8" × 5 1/2" × 23 3/4" | Cedar fence picket | ☐ |
| Ottoman legs | 4 | 1 1/2" × 3 1/2" × 12" | 2x4 | ☐ |
| Ottoman sides | 2 | 1 1/2" × 3 1/2" × 21" | 2x4 | ☐ |
| Ottoman middle supports | 3 | 1 1/2" × 3 1/2" × 20 3/4" | 2x4 | ☐ |
| Ottoman deck slats | 4 | 5/8" × 5 1/2" × 23 3/4" | Cedar fence picket | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft Two for the chair frame, two for the ottoman frame. | 4 each | ☐ |
| Cedar fence picket, 5-1/2" x 72", not dog-eared (Cedar) Two per frame, ripped to length for the seat deck. | 4 each | ☐ |
| Exterior self-tapping screws, 2-1/2" Frame joints, two per joint. | 40 each | ☐ |
| Exterior self-tapping screws, 1-5/8" Attaches the cedar deck slats to the frame. | 40 each | ☐ |
| Exterior stain Optional — bare cedar silvers on its own. Apply to the slats before assembly if using. | 1 qt | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.