NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A single wide file drawer that drops into the base of the modular office bookshelf, riding on 12" undermount slides. Built from bookcase offcuts.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Drawer bottom Trim the long edge 1" to reach final width. | 1 | 3/4" × 15 1/2" × 37 1/2" | 1x16 plywood | ☐ |
| Drawer sides | 2 | 3/4" × 9 1/4" × 14 1/2" | 1x10 | ☐ |
| Drawer back | 1 | 3/4" × 9 1/4" × 36" | 1x10 | ☐ |
| Drawer face Measure to fit the actual opening. | 1 | 3/4" × 9 1/4" × 38 1/4" | 1x10 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x16 plywood offcut, 4 ft Drawer bottom — leftover from the bookcases. | 1 each | ☐ |
| 1x10, 6 ft Drawer sides, back, and face. | 1 each | ☐ |
| Undermount drawer slides, 12 in | 1 pair | ☐ |
| Lateral file hanging system Optional — only if used for hanging files. | 1 each | ☐ |
| Wood screws, 2 in | 1 box | ☐ |
| Wood glue | 1 bottle | ☐ |
| Wood filler | 1 each | ☐ |
| Finish | 1 quart | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.