NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A narrow two-drawer plywood pedestal designed as one interchangeable module in a modular office system — genuinely small enough to slot under a desktop alongside other matching base units.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 15 1/2" × 29" | 3/4" plywood, ripped to 15-1/2" strips, half sheet or 8 ft strip | ☐ |
| Base trim | 2 | 3/4" × 3 1/2" × 18" | 1x4, 4 ft | ☐ |
| Top and middle trim | 4 | 3/4" × 1 1/2" × 18" | 1x2, 8 ft | ☐ |
| Top | 1 | 3/4" × 15 1/2" × 19 1/2" | 3/4" plywood, ripped to 15-1/2" strips, half sheet or 8 ft strip | ☐ |
| Drawer sides | 4 | 3/4" × 7 1/4" × 14" | 1x8, 8 ft, for drawer sides | ☐ |
| Drawer front/back | 4 | 3/4" × 7 1/4" × 15 1/2" | 1x8, 8 ft, for drawer sides | ☐ |
| Drawer bottoms | 2 | 1/4" × 17" × 14" | 1/4" plywood, 48 in x 24 in | ☐ |
| Drawer face Cut to fit; positioned in a later step. | 1 | 3/4" × 11 1/4" × 27" | 1x12, 3 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, ripped to 15-1/2" strips, half sheet or 8 ft strip | 1 each | ☐ |
| 1/4" plywood, 48 in x 24 in | 1 each | ☐ |
| 1x2, 8 ft | 1 each | ☐ |
| 1x4, 4 ft | 1 each | ☐ |
| 1x12, 3 ft | 1 each | ☐ |
| 1x8, 8 ft, for drawer sides | 2 each | ☐ |
| Euro drawer slides, white, 14 in | 2 pair | ☐ |
| Pocket hole screws, 1-1/4", or self-tapping wood screws, 2" | 60 each | ☐ |
| Brad nails, 1-1/4" and 3/4" | 60 each | ☐ |
| Iron-on edge banding (optional) | 10 ft | ☐ |
| Wood glue | 3 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.