NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A desk base cabinet sized to hold a computer tower beside a small drawer — one module in a mix-and-match plywood office system.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Box top/bottom/sides Cut to your collection's dimensions; open bay sized to your tower. | 4 | 3/4" × 15 1/2" × 29" | 3/4" plywood | ☐ |
| Shelves | 2 | 3/4" × 15 1/2" × 7 1/2" | 3/4" plywood | ☐ |
| Center partition Sets the open tower bay — measure your computer first. | 1 | 3/4" × 15 1/2" × 17 3/4" | 3/4" plywood | ☐ |
| Back | 1 | 1/4" × 19 1/2" × 29 3/4" | 1/4" plywood | ☐ |
| Drawer bottom | 1 | 3/4" × 15 1/2" × 13 1/2" | 3/4" plywood | ☐ |
| Drawer back | 1 | 3/4" × 3 1/2" × 15 1/2" | 1x4 | ☐ |
| Drawer sides | 2 | 3/4" × 3 1/2" × 14 1/2" | 1x4 | ☐ |
| Drawer face | 1 | 3/4" × 5 1/2" × 17 3/4" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood or MDF, 4x8 sheet Ripped into 15-1/2" strips for the box, shelves, and partition. | 1 each | ☐ |
| 1/4" plywood, back piece | 1 each | ☐ |
| 1x6 board, 18" (Pine) Drawer face. | 1 each | ☐ |
| 1x4 board, 8 ft (Pine) Drawer box. | 1 each | ☐ |
| 1x2 and 1x3 trim Front and side trim, as on the narrow base. | 2 each | ☐ |
| 12" drawer slides, side or undermount Install undermounts before fastening the top. | 1 pair | ☐ |
| Pocket-hole screws, 1-1/4" | 40 each | ☐ |
| Finish nails, 1-1/4" | 30 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.