Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Modular Miter Station – Phase 3 – Assembly Cart
The ultimate assembly cart!
- Difficulty
- Intermediate
- Time
- 5–9.8 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top & Bottom | 2 | 3/4" × 32" × 56" | — | ☐ |
| Clamp End Uprights | 2 | 3/4" × 10" × 29" | — | ☐ |
| Shelf End Uprights | 2 | 3/4" × 14" × 29" | — | ☐ |
| Drawer Side Upright | 1 | 3/4" × 12" × 29" | — | ☐ |
| Middle Section Uprights | 2 | 3/4" × 29" × 32" | — | ☐ |
| Shelves | 5 | 3/4" × 14" × 18" | — | ☐ |
| Second Top | 1 | 3/4" × 28" × 53" | — | ☐ |
| Middle Section Shelf | 1 | 3/4" × 29" × 30" | — | ☐ |
| Drawer Box Sides | 20 | 3/4" × 5" × 11" | — | ☐ |
| Drawer Fronts | 5 | 3/4" × 5" × 13" | — | ☐ |
| Sliding Doors | 4 | 1/4" × 16" × 29" | — | ☐ |
| Drawer Bottoms | 5 | 1/4" × 11" × 12" | — | ☐ |
| Drawer Slides | 10 | 3/4" × 3/4" × 11" | — | ☐ |
| Shelf Cleat | 2 | 3/4" × 1" × 29" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 3 board | ☐ |
| Plywood, 1/4" Thick Full Sheet | 1 board | ☐ |
| 4" Casters | 4 each | ☐ |
| Box 1 1/4" Coarse Pocket Holes Screws | 1 each | ☐ |
| Box 1 1/4" Wood Screws | 1 each | ☐ |
| 1" Wood Lag Screws | 16 each | ☐ |
| Washers | 16 each | ☐ |
| Kreg Universal Clamp Track Kit - Optional | 1 each | ☐ |
| Box 1 1/4" 18 Ga Brad Nails | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.