NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A slatted-shelf console with X-braced ends, built almost entirely from 2x2 with a pocket-hole jig. Optionally paired into a couch-spanning bridge.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 1 1/2" × 30" | 2x2 | ☐ |
| End rails | 6 | 1 1/2" × 1 1/2" × 11 1/4" | 2x2 | ☐ |
| Front/back shelf trim | 6 | 1 1/2" × 1 1/2" × 31 1/4" | 2x2 | ☐ |
| Shelf slats | 18 | 3/4" × 2 1/2" × 11 1/4" | 1x3 | ☐ |
| Top | 1 | 3/4" × 11 1/4" × 31 1/4" | 1x12 | ☐ |
| X pieces Cut to fit the end openings. | 4 | 1 1/2" × 1 1/2" × 20" | 2x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x2, 8 ft (Whitewood) Legs, ends, shelf trim, X pieces. | 6 each | ☐ |
| 1x3, 8 ft (Whitewood) Shelf slats. | 3 each | ☐ |
| 1x12, 3 ft (Pine) Top. A 3/4" plywood piece 11-1/4" x 31-1/4" also works. | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" and 2-1/2" | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.