Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Miter Saw Station Project Plan
A mobile miter saw station for your garage or workshop to help you make precise cuts easily with the Precision Trak and Stop Kit and plenty of support for long boards.
- Difficulty
- Expert
- Time
- 8.5–16.8 hours
- Cost
- $$$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Cabinet door | 4 | 3/4" × 23" × 27" | — | ☐ |
| Drawer front | 2 | 3/4" × 3" × 23" | — | ☐ |
| Fence | 2 | 3/4" × 3" × 48" | — | ☐ |
| Back table | 2 | 3/4" × 7" × 48" | — | ☐ |
| Front table | 2 | 3/4" × 8" × 48" | — | ☐ |
| Cabinet top | 2 | 3/4" × 15" × 46" | — | ☐ |
| Cabinet bottom | 2 | 3/4" × 15" × 46" | — | ☐ |
| Cabinet side outside | 2 | 3/4" × 15" × 32" | — | ☐ |
| Cabinet divider | 2 | 3/4" × 15" × 26" | — | ☐ |
| Table support | 4 | 3/4" × 2" × 15" | — | ☐ |
| Shelf support | 2 | 3/4" × 1" × 14" | — | ☐ |
| Cabinet side inside | 2 | 3/4" × 15" × 32" | — | ☐ |
| Miter saw shelf | 1 | 3/4" × 15" × 26" | — | ☐ |
| Shelf | 4 | 3/4" × 15" × 22" | — | ☐ |
| Drawer b/f | 4 | 3/4" × 1" × 14" | — | ☐ |
| Drawer side | 4 | 3/4" × 1" × 20" | — | ☐ |
| MS shelf front | 1 | 3/4" × 2" × 26" | — | ☐ |
| Bottom brace | 1 | 3/4" × 2" × 26" | — | ☐ |
| Cabinet top support | 2 | 3/4" × 2" × 46" | — | ☐ |
| Bottom skirt | 4 | 3/4" × 2" × 46" | — | ☐ |
| Cabinet back | 2 | 1/4" × 30" × 46" | — | ☐ |
| Middle back | 1 | 1/4" × 26" × 29" | — | ☐ |
| Drawer bottoms | 2 | 1/4" × 14" × 21" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 3 board | ☐ |
| Plywood, 1/4" Thick Full Sheet | 1 board | ☐ |
| 3" casters | 8 each | ☐ |
| Cabinet door hinge - frameless full overlay | 8 each | ☐ |
| 14" drawer slides | 2 each | ☐ |
| Cabinet knobs | 4 each | ☐ |
| 1 1/4" brad nails | 150 each | ☐ |
| Wood glue | 1 each | ☐ |
| Sand paper | 1 each | ☐ |
| 1 1/4" pocket hole screws | 125 each | ☐ |
| Kreg Precision Trak and Stop Kit | 1 each | ☐ |
| Shelf pins | 16 each | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.