NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A low platform bed with a clean plank headboard — built as four flat-packing sections (headboard, two rails, footboard) that screw together in the bedroom, in any mattress size.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Headboard planks Queen. Twin 46", full 62", king 84", cal king 80". | 7 | 3/4" × 7 1/4" × 68" | 1x8 | ☐ |
| Headboard top rail Cut to match your actual glued-up plank width. | 1 | 3/4" × 2 1/2" × 68" | 1x3 | ☐ |
| Headboard verticals About 50" — cut to fit the assembled panel. | 3 | 3/4" × 2 1/2" × 50" | 1x3 | ☐ |
| Side rails Mattress length. 75" for twin/full, 84" cal king. | 2 | 1 1/2" × 5 1/2" × 80" | 2x6 | ☐ |
| Slat ledges Flush to the BOTTOM of each rail — and the rails are MIRRORED. | 2 | 1 1/2" × 3 1/2" × 68 1/2" | 2x4 | ☐ |
| Rail legs | 2 | 1 1/2" × 5 1/2" × 11 1/2" | 2x6 | ☐ |
| Footboard Queen. 41" twin, 57" full, 79" king, 75" cal king. | 1 | 1 1/2" × 5 1/2" × 63" | 2x6 | ☐ |
| Footboard legs | 2 | 1 1/2" × 3 1/2" × 6" | 2x4 | ☐ |
| Center rail 72" twin/full, 81" cal king. | 1 | 1 1/2" × 3 1/2" × 77" | 2x4 | ☐ |
| Center rail blocks | 2 | 1 1/2" × 3 1/2" × 12" | 2x4 | ☐ |
| Center leg | 1 | 1 1/2" × 5 1/2" × 11 1/2" | 2x6 | ☐ |
| Slats Mattress width. Cal king wants 11 at 72". | 10 | 3/4" × 3 1/2" × 60" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x8, 6 ft Headboard planks. Queen quantities throughout — see cut-list notes for other sizes. | 7 each | ☐ |
| 1x3, 8 ft Headboard back frame. | 4 each | ☐ |
| 2x6, 8 ft Side rails, legs, and footboard. | 3 each | ☐ |
| 2x4, 8 ft Slat ledges and center support. | 3 each | ☐ |
| 1x4, 10 ft Bed slats — each 10-footer yields two queen slats. | 5 each | ☐ |
| Pocket hole screws, 1-1/4" | 50 each | ☐ |
| Pocket hole screws, 2-1/2" | 4 each | ☐ |
| Self-tapping wood screws, 2-1/2", star drive | 50 each | ☐ |
| Self-tapping wood screws, 1-5/8" Slats to ledges. | 30 each | ☐ |
| Stain or paint Applied to the four sections FLAT, before assembly. | 1 qt | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Pocket Hole Jig. Materials: 1x8, 6 ft, Pocket hole screws, 1-1/4"
Drill 3/4" pocket holes along one edge of six of the seven 1x8s, about every 10", and join the planks face-flush with 1-1/4" pocket screws. Clamp each seam flat as you drive — the headboard is the face of this bed and a stepped seam will catch light forever.
Tools: Drill / Driver, Pocket Hole Jig, Random Orbit Sander, Tape Measure. Materials: 1x3, 8 ft, Pocket hole screws, 1-1/4", Stain or paint
Cut the 1x3 top rail to match the panel's real length and pocket-screw it across the top, holes inward. Cut the three verticals to fit and attach the same way. The back frame is what keeps seven planks acting as one panel.
Sand and finish the headboard NOW, flat on sawhorses.
Tools: Drill / Driver, Pencil, Speed Square. Materials: 2x6, 8 ft, 2x4, 8 ft, Self-tapping wood screws, 2-1/2", star drive
Screw a 2x4 ledge to each 2x6 rail, flush to the BOTTOM edge, with 2-1/2" screws — the step up from ledge to rail top is what hides the mattress edge. Add a 2x6 stub leg at the end of each ledge, square to the rail.
Build the second rail as a MIRROR of the first; two copies give you one rail with its ledge facing out of the bed. Then hold each rail against the headboard, trace the joint, and PRE-DRILL the connection holes — bedroom assembly becomes screwdriver work.
Tools: Drill / Driver, Pocket Hole Jig, Random Orbit Sander. Materials: 2x6, 8 ft, 2x4, 8 ft, Pocket hole screws, 2-1/2", Self-tapping wood screws, 2-1/2", star drive, Stain or paint
Drill two 1-1/2" pocket holes in one end of each 6" footboard leg and attach them to the footboard, inset 1-1/2" from the ends, flush to the bottom — 2-1/2" pocket screws. Build the center rail: 2x4 with a 12" block at each end and the 2x6 center leg.
Finish these flat too. Every part of this bed gets its finish before the bedroom sees it.
Tools: Drill / Driver, Tape Measure. Materials: 1x4, 10 ft, Self-tapping wood screws, 2-1/2", star drive, Self-tapping wood screws, 1-5/8"
Carry the four sections in. Screw the rails to the headboard through the pre-drilled holes, attach the footboard to the rail legs, and screw the center rail to headboard and footboard — all with the 2-1/2" star-drive screws.
Lay the ten slats across the ledges and center rail with even spacing and fasten each with the 1-5/8" screws. Mattress on. The frame comes apart with the same screwdriver the next time you move — which is the entire point.