NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A cabinet sized to house a mini fridge with a drawer above and a shelf that can hold snacks or come out for a taller fridge. Legs, drawer, and a real top.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 15 3/4" × 28" | 3/4" plywood | ☐ |
| Side trim | 4 | 3/4" × 1 1/2" × 15 3/4" | 1x2 | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 30" | 2x2 | ☐ |
| Shelves One is the optional middle/adjustable shelf. | 2 | 3/4" × 15 3/4" × 24" | 3/4" plywood | ☐ |
| Front/back trim | 3 | 1 1/2" × 1 1/2" × 24" | 2x2 | ☐ |
| Drawer trim | 2 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Top panel | 1 | 3/4" × 15 3/4" × 29" | 3/4" plywood | ☐ |
| Top trim (1x3) | 1 | 3/4" × 2 1/2" × 29" | 1x3 | ☐ |
| Top trim (1x2) | 1 | 3/4" × 1 1/2" × 29" | 1x2 | ☐ |
| Drawer front/back | 2 | 3/4" × 2 1/2" × 21 1/2" | 1x3 | ☐ |
| Drawer sides | 2 | 3/4" × 2 1/2" × 16" | 1x3 | ☐ |
| Drawer bottom | 1 | 1/4" × 16" × 23" | 1/4" plywood | ☐ |
| Drawer face | 1 | 3/4" × 3 1/2" × 23 3/4" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet Cut into 15-3/4" strips (the '1x16' in this plan). Formaldehyde-free preferred. | 1 each | ☐ |
| 1x3, 8 ft (Pine) Top trim and drawer parts. | 1 each | ☐ |
| 2x2, 8 ft (Whitewood) Legs and front/back trim. | 2 each | ☐ |
| 1x2, 8 ft (Pine) Side and drawer trim. | 1 each | ☐ |
| 1x4, 2 ft (Pine) Drawer face. | 2 foot | ☐ |
| Knob or handle | 1 each | ☐ |
| Euro drawer slides, 16" bottom-mount (set) | 1 each | ☐ |
| Plywood, 1/4", scrap 23" x 16" Drawer bottom. | 1 each | ☐ |
| Shelf pins For the optional adjustable middle shelf. | 4 each | ☐ |
| Pocket-hole screws, 1-1/4" | 40 each | ☐ |
| Finish nails, 1-1/4" and 2" | 60 each | ☐ |
| Wood glue | 6 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.