NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A low buffet cabinet with plank doors and open display shelves, cut from a single sheet of plywood. Casework with real hinged doors — the doors are the hard part.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top and bottom | 2 | 3/4" × 15 3/4" × 55 1/2" | 3/4" plywood | ☐ |
| Main shelf Cut to fit the finished opening. | 1 | 3/4" × 15 3/4" × 36 1/4" | 3/4" plywood | ☐ |
| Sides / dividers | 3 | 3/4" × 15 3/4" × 25 1/2" | 3/4" plywood | ☐ |
| Small shelves Cut to fit. | 2 | 3/4" × 15 3/4" × 17" | 3/4" plywood | ☐ |
| Back | 1 | 1/4" × 27" × 55 1/2" | 1/4" plywood | ☐ |
| Face frame stiles/rails (long) | 2 | 3/4" × 1 1/2" × 55 1/2" | 1x2 | ☐ |
| Face frame verticals | 3 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Base sides | 2 | 3/4" × 5 1/2" × 15 3/4" | 1x6 | ☐ |
| Base front | 1 | 3/4" × 5 1/2" × 34" | 1x6 | ☐ |
| Base rail | 1 | 3/4" × 2 1/2" × 34" | 1x3 | ☐ |
| Door frame pieces Both ends beveled 45° off square, long point to long point. | 4 | 3/4" × 1 1/2" × 17 1/2" | 1x2 | ☐ |
| Door panels | 5 | 3/4" × 3 1/2" × 23 3/4" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet Ripped into 15-3/4"-wide strips. Plan the cuts — there's just enough. | 1 each | ☐ |
| Plywood, 1/4", sheet or backerboard Back panel. | 1 each | ☐ |
| 1x2, 8 ft (Pine) Face frame and door frames. | 3 each | ☐ |
| 1x6, 6 ft (Pine) Base. | 1 each | ☐ |
| 1x3, 3 ft (Pine) Base rail. | 3 foot | ☐ |
| 1x4, 10 ft (Pine) Door panels. | 2 each | ☐ |
| Butt hinges (sets) | 2 each | ☐ |
| Magnetic catches | 2 each | ☐ |
| Knobs | 2 each | ☐ |
| Pocket-hole screws, 1-1/4" | 40 each | ☐ |
| Brad nails, 1-1/4" | 80 each | ☐ |
| Wood glue | 8 oz | ☐ |
| Stain One medium tone, worked two ways on the doors. | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.