Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Maple Night Stands
These simple and elegant maple night stands were designed and built to match the maple combination dresser and craft cabinet in our guest bedroom (plans available on buildsomething.com).
- Difficulty
- Expert
- Time
- 8.8–17 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top Maple | 2 | 3/4" × 17" × 21" | — | ☐ |
| Drawer Fronts Maple | 2 | 3/4" × 7" × 15" | — | ☐ |
| Frame Stiles Maple | 4 | 3/4" × 2" × 24" | — | ☐ |
| Frame Rails Maple | 4 | 3/4" × 1" × 14" | — | ☐ |
| Sides Maple Plywood | 4 | 3/4" × 15" × 24" | — | ☐ |
| Top Frame Maple Plywood | 2 | 3/4" × 14" × 17" | — | ☐ |
| Bottom Maple Plywood | 2 | 3/4" × 15" × 17" | — | ☐ |
| Drawer Box Sides Poplar | 4 | 1/2" × 5" × 15" | — | ☐ |
| Drawer Box Fronts & Backs Poplar | 4 | 1/2" × 5" × 14" | — | ☐ |
| Backs Maple Plywood | 2 | 1/4" × 18" × 21" | — | ☐ |
| Drawer Bottoms Maple Plywood | 2 | 1/4" × 13" × 15" | — | ☐ |
| Drawer Guides Oak | 4 | 3/4" × 2" × 14" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Maple Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Maple Plywood, 1/4" Thick Half Sheet | 1 board | ☐ |
| Board, Board Feet Maple | 11 board | ☐ |
| Board, Board Feet Poplar | 6 board | ☐ |
| Oak Board, 1x6 36" | 1 board | ☐ |
| 1 1/4" Kreg coarse and fine pocket screws | 25 each | ☐ |
| Titebond I Wood Glue | 1 each | ☐ |
| Sandpaper and Disks 80 - 220 grit | 10 each | ☐ |
| 1 1/4" Brad Nails | 25 each | ☐ |
| Century Hardware 29517-DSN Majestic Knob, Nickel | 2 each | ☐ |
| Minwax Polycrylic Satin Finish | 1 each | ☐ |
| Boiled Linseed Oil | 1 each | ☐ |
| Minwax Tung Oil | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.