Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Long Rustic Modern Buffet Table
A simple build that can be made with off-the-shelf lumber.
- Difficulty
- Advanced
- Time
- 7–13.3 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Table Top and Shelf Boards | 6 | 2" × 6" × 96" | — | ☐ |
| Table Leg Sides | 8 | 1" × 4" × 32 1/4" | — | ☐ |
| Table Leg Top & Bottom | 8 | 1" × 4" × 15" | — | ☐ |
| End Boards | 2 | 1" × 12" × 15" | — | ☐ |
| Drawer Frame Top & Bottom | 2 | 1" × 2" × 95 1/2" | — | ☐ |
| Drawer Frame Sides | 6 | 1" × 2" × 6 3/4" | — | ☐ |
| Plywood Back Panel | 1 | 1/4" × 9 3/4" × 95 1/2" | — | ☐ |
| Slide Supports | 6 | 2" × 2" × 13 3/4" | — | ☐ |
| Drawer Fronts | 3 | 3/4" × 9 1/4" × 27 3/4" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x6 96" | 6 board | ☐ |
| Board, 2x2 96" | 1 board | ☐ |
| Board, 1x4 96" | 4 board | ☐ |
| Board, 1x12 48" | 1 board | ☐ |
| Board, 1x10 96" | 1 board | ☐ |
| Board, 1x3 96" | 3 board | ☐ |
| Board, 1x2 96" | 3 board | ☐ |
| Plywood, 1/4" Thick Full Sheet | 1 board | ☐ |
| 2-1/2" pocket hole screws | 50 each | ☐ |
| 2" pocket hole screws | 50 each | ☐ |
| 1-1/4" pocket hole screws | 50 each | ☐ |
| 3/4" wood screws | 12 each | ☐ |
| 14" drawer slides | 3 each | ☐ |
| Drawer knobs or pulls | 3 each | ☐ |
| 1-1/4" 18-gauge brads | 200 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.