NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A freestanding mudroom locker from 1x12s — two divided coat bays over open shelves, faced with a 1x2 frame, with a back sized to a full plywood sheet width so nothing gets ripped.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 11 1/4" × 67 1/4" | 1x12 | ☐ |
| Shelves | 3 | 3/4" × 11 1/4" × 46 1/2" | 1x12 | ☐ |
| Top Overhangs the sides. | 1 | 3/4" × 11 1/4" × 49 1/2" | 1x12 | ☐ |
| Locker dividers | 2 | 3/4" × 11 1/4" × 36 1/2" | 1x12 | ☐ |
| Header | 1 | 3/4" × 1 1/2" × 48" | 1x2 | ☐ |
| Side trim | 2 | 3/4" × 1 1/2" × 65 3/4" | 1x2 | ☐ |
| Crown | 1 | 3/4" × 1 1/2" × 49 1/2" | 1x2 | ☐ |
| Back Full sheet width — the 48" case width exists so this needs no rip. | 1 | 1/4" × 48" × 67 1/4" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 12 ft, pine or whitewood Sides, shelves, top, and locker dividers. | 3 each | ☐ |
| 1x2, 8 ft Face frame, header, side trim, crown. | 4 each | ☐ |
| 1x3, 4 ft | 1 each | ☐ |
| Plywood or paneling, 1/4", 4x8 sheet The back — used at full 48" width, zero rips. | 1 each | ☐ |
| Coat hooks Two per locker bay, screwed through the back into solid wood where possible. | 4 each | ☐ |
| Pocket hole screws, 1-1/4" | 44 each | ☐ |
| Brad nails, 2" and 1" | 150 each | ☐ |
| Wood glue | 8 oz | ☐ |
| Wood filler or pocket hole plugs, paint | 1 qt | ☐ |
| Anti-tip strap 67" tall + hanging kids = strap it to a stud. | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.