Lightweight Cornhole Boards — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

3/4" × 2 1/2" — 1x3

4 boards · 5.6 board feet (includes 15% for knots and defects) · 99% of the boards you buy used

Board 1 · 1 5/8" left over
48"22 1/2"22 1/2"
1. Frame sides — 48"
2. Frame ends and center brace — 22 1/2"
3. Frame ends and center brace — 22 1/2"
Board 2 · 1 5/8" left over
48"22 1/2"22 1/2"
1. Frame sides — 48"
2. Frame ends and center brace — 22 1/2"
3. Frame ends and center brace — 22 1/2"
Board 3 · 1 5/8" left over
48"22 1/2"22 1/2"
1. Frame sides — 48"
2. Frame ends and center brace — 22 1/2"
3. Frame ends and center brace — 22 1/2"
Board 4 · 3/8" left over
48"11 1/2"11 1/2"11 1/2"11 1/2"
1. Frame sides — 48"
2. Legs — 11 1/2"
3. Legs — 11 1/2"
4. Legs — 11 1/2"
5. Legs — 11 1/2"

1/2" × 24" — 1/2" exterior plywood

2 boards · 9.2 board feet (includes 15% for knots and defects) · 51% of the boards you buy used

Board 1 · 46 7/8" left over
48"
1. Decks — 48"
Board 2 · 46 7/8" left over
48"
1. Decks — 48"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 2 1/2" — 1x3

Board 1 · 1 5/8" left over

Board 2 · 1 5/8" left over

Board 3 · 1 5/8" left over

Board 4 · 3/8" left over

1/2" × 24" — 1/2" exterior plywood

Board 1 · 46 7/8" left over

Board 2 · 46 7/8" left over