NotchLightweight Concrete Planter
Step-by-step build — 3 steps. Also available as a print sheet.
1Cut the plywood
Cut the basic pieces with a circular saw guided by the Kreg Straight Edge Guide.
2Cut the top
Cut a circle in the top with a jig saw, then cut it in half to get two panels that can go around the plant.
3Assemble and apply concrete
Screw the 1-1/2" wide strips to the narrow side panels to make ledges for the top and base plates. Use pocket holes to attach the side panels to make a square plywood tube. Coat the entire outside with feather finish concrete mix.
