Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Kreg Precision Router Table Upgrade
Kreg's precision router table is a great asset in my shop without a doubt, but I really wanted to add was some organization!
- Difficulty
- Intermediate
- Time
- 5.3–10.3 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side | 2 | 1/2" × 16" × 19 3/4" | — | ☐ |
| Horizontal Divider | 1 | 1/2" × 19 1/2" × 26 3/4" | — | ☐ |
| Divider | 2 | 1/2" × 12" × 19 1/2" | — | ☐ |
| Back | 1 | 1/4" × 16" × 26 3/4" | — | ☐ |
| Small Drawer Box Side | 8 | 1/2" × 3" × 18" | — | ☐ |
| Small Drawer Box Front & Back | 8 | 1/2" × 3" × 5 11/16" | — | ☐ |
| Small Drawer Box Bottom | 4 | 1/4" × 6 1/16" × 17 3/8" | — | ☐ |
| Small Drawer Face | 4 | 1/2" × 4 5/16" × 7 7/16" | — | ☐ |
| Large Drawer Box Side | 2 | 1/2" × 4 1/2" × 18" | — | ☐ |
| Large Drawer Box Front & BackLarge Drawer Box Front & Back | 2 | 1/2" × 4 1/2" × 22" | — | ☐ |
| Large Drawer Box Bottom | 1 | 1/4" × 17 3/8" × 22 3/8" | — | ☐ |
| Large Drawer Box Face | 1 | 1/2" × 6 1/4" × 22 3/4" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 1/2" Thick 5x5 | 1 board | ☐ |
| Plywood, 1/4" Thick Half Sheet | 1 board | ☐ |
| Arylic, 1/4" Thick 1x1 | 1 board | ☐ |
| Board, 3/4" Thick Scrap | 1 board | ☐ |
| 18" Push to Open Drawer Slides | 5 each | ☐ |
| Magnets | 4 each | ☐ |
| 1" Coarse Pan Head Pocket Hole Screw | 58 each | ☐ |
| 1/2" Flat Head Screw | 50 each | ☐ |
| Dust Right® 2-1/2'' Expandable Shop Vacuum Hose Kit | 1 each | ☐ |
| 2-1/2" Hose Clamps | 4 each | ☐ |
| Foam Router Bit Tray | 2 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.