NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
This custom workbench was designed to incorporate the Kreg Trak system and Bench Clamps.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End Apron | 2 | 2" × 6" × 32 1/4" | — | ☐ |
| Side Apron | 1 | 2" × 6" × 47 1/4" | — | ☐ |
| Bottom Frame | 1 | 2" × 6" × 47 1/4" | — | ☐ |
| Table Leg | 4 | 2" × 6" × 33 3/4" | — | ☐ |
| Outside Leg Support | 2 | 2" × 4" × 29 1/4" | — | ☐ |
| Inside Leg Support | 1 | 2" × 4" × 50 1/4" | — | ☐ |
| Side Apron | 1 | 2" × 4" × 47 1/4" | — | ☐ |
| Bottom Frame | 5 | 2" × 4" × 20 1/4" | — | ☐ |
| Bench Top | 1 | 3" × 24" × 45" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x6 96" | 4 board | ☐ |
| Board, 2x4 96" | 4 board | ☐ |
| Plywood, 3/4" Thick Quarter Sheet | 1 board | ☐ |
| 45" Kreg Trak | 1 each | ☐ |
| 27" Kreg Trak | 1 each | ☐ |
| 3" Kreg Bench Clamp | 1 each | ☐ |
| 6" Kreg Bench Clamp | 1 each | ☐ |
| Kreg Clamp Vise | 1 each | ☐ |
| 1/4" hex head machine bolts at 2.50" | 18 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.