NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A compact plywood-and-1x4 island whose front drawer is really a sliding tray sized to carry two standard trash bins, hidden behind a real drawer face.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 1 1/2" × 34 1/2" | 2x2 | ☐ |
| Side trim | 4 | 3/4" × 1 1/2" × 23 1/4" | 1x2 | ☐ |
| Side panels | 2 | 3/4" × 23 1/4" × 30 1/2" | 3/4" cabinet grade plywood, sheet | ☐ |
| Front trim | 2 | 1 1/2" × 1 1/2" × 18 1/2" | 2x2 | ☐ |
| Back trim | 2 | 3/4" × 1 1/2" × 18 1/2" | 1x2 | ☐ |
| Back panel | 1 | 3/4" × 18 1/2" × 30 1/2" | 3/4" cabinet grade plywood, sheet | ☐ |
| Drawer tray sides | 2 | 3/4" × 3 1/2" × 23 3/4" | 1x4 | ☐ |
| Drawer tray back Cut to fit the gap between the installed drawer sides — treat 16" as an estimate. | 1 | 3/4" × 3 1/2" × 16" | 1x4 | ☐ |
| Drawer tray bottom Cut to fit. | 1 | 3/4" × 16" × 22 1/4" | 3/4" cabinet grade plywood, sheet | ☐ |
| Drawer face stiles | 2 | 3/4" × 3 1/2" × 27 1/4" | 1x4 | ☐ |
| Drawer face rails | 2 | 3/4" × 3 1/2" × 11 1/4" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x2, 8 ft Legs and front trim. | 2 each | ☐ |
| 1x2, 8 ft Side and back trim. | 1 each | ☐ |
| 1x2, 4 ft | 1 each | ☐ |
| 1x4, 10 ft Drawer sides, face frame. | 2 each | ☐ |
| 3/4" cabinet grade plywood, sheet | 1 each | ☐ |
| Drawer slides, 24" full extension | 1 set | ☐ |
| Cabinet screws, 2" | 8 each | ☐ |
| Countertop or butcher block top, 27-1/4" x 22-1/2" | 1 each | ☐ |
| Drawer pull or handle | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 40 each | ☐ |
| Brad nails, 1-1/4" | 30 each | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.