NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Here is a simple plan for building kitchen drawer dividers.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Plywood bottom | 1 | 1/4" × 15" × 20" | — | ☐ |
| Front dividers | 5 | 1/2" × 2" × 10" | — | ☐ |
| Middle divider | 1 | 1/2" × 2" × 15" | — | ☐ |
| Back divider | 1 | 1/2" × 2" × 9" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 1/4" Thick Quarter Sheet | 1 board | ☐ |
| Poplar, 1/2" X 5 1/2" 48" | 1 board | ☐ |
| 1" pin nails | 50 each | ☐ |
| Titebond 1 wood glue | 1 each | ☐ |
| Minwax Polycrylic Satin Finish | 1 each | ☐ |
| Sandpaper 100 - 220 grit | 3 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.