NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A long rolling console styled after an industrial workbench, with notched 2x4 legs threaded onto a through-stretcher, a slatted 1x6 lower shelf, and a 2x10 plank top.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Longer leg pieces | 4 | 1 1/2" × 3 1/2" × 34 1/2" | Pine 2x4 | ☐ |
| Shorter leg pieces | 4 | 1 1/2" × 3 1/2" × 31" | Pine 2x4 | ☐ |
| Middle leg stretcher Passes through the leg notches. | 2 | 1 1/2" × 5 1/2" × 22 1/4" | Pine 2x6 | ☐ |
| Shorter bottom stretcher | 2 | 1 1/2" × 5 1/2" × 13 3/4" | Pine 2x6 | ☐ |
| Top studs | 5 | 1 1/2" × 3 1/2" × 20 3/4" | Pine 2x4 | ☐ |
| Top aprons, front and back | 2 | 1 1/2" × 3 1/2" × 88 1/2" | Pine 2x4 | ☐ |
| Bottom shelf aprons, front and back | 2 | 1 1/2" × 5 1/2" × 88 1/2" | Pine 2x6 | ☐ |
| Center legs | 2 | 1 1/2" × 3 1/2" × 31" | Pine 2x4 | ☐ |
| Inside center legs | 2 | 1 1/2" × 3 1/2" × 22" | Pine 2x4 | ☐ |
| Shelf board supports | 2 | 1 1/2" × 1 1/2" × 81" | Pine 2x2 | ☐ |
| Bottom shelf boards | 15 | 3/4" × 5 1/2" × 20 3/4" | Pine 1x6 | ☐ |
| Top boards Used at full board length. | 3 | 1 1/2" × 9 1/4" × 96" | Pine 2x10 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x4, 8 ft | 8 each | ☐ |
| Pine, 2x6, 8 ft | 3 each | ☐ |
| Pine, 1x6, 8 ft | 4 each | ☐ |
| Pine, 2x10, 8 ft | 3 each | ☐ |
| Pine, 2x2, 8 ft 2x4 also works. | 2 each | ☐ |
| Caster wheels | 4 each | ☐ |
| 2-1/2" self-tapping torque-head wood screws | 1 box | ☐ |
| 3" lag screws Decorative exposed heads at the notched joints. | 24 each | ☐ |
| 1-1/4" finish nails Attaching the bottom shelf boards. | 1 box | ☐ |
| 2-1/2" pocket hole screws 8 needed, for the bottom apron. | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.