NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A pair of plain, non-stacking 2x4 sawhorses built from a T-shaped leg spine, angled leg sets, and diagonal 1x3 cross bracing — genuinely simple shop utility, no nesting feature.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom foot pieces Both ends cut at 15° off square, ends not parallel, longest point measurement. | 4 | 1 1/2" × 3 1/2" × 10 3/4" | 2x4, 8 ft | ☐ |
| Center pieces | 4 | 1 1/2" × 3 1/2" × 19 1/4" | 2x4, 8 ft | ☐ |
| Legs Both ends cut at 15° off square, parallel, long point to short point measurement. | 8 | 1 1/2" × 3 1/2" × 25 7/8" | 2x4, 8 ft | ☐ |
| Top and bottom support rails | 6 | 1 1/2" × 3 1/2" × 32" | 2x4, 8 ft | ☐ |
| Diagonal cross pieces Both ends cut parallel at 18° off square, long point to short point measurement. | 4 | 3/4" × 2 1/2" × 33 5/8" | 1x3, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft | 4 each | ☐ |
| 1x3, 8 ft | 2 each | ☐ |
| Self-tapping wood screws, 2-1/2" | 40 each | ☐ |
| Self-tapping wood screws, 1-1/2" | 16 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.