Hanging S'more Station

Cut the two 1x6 dividers first, off the end of a longer piece so you never cut tiny parts at the saw. Then measure and cut the 1x4 sides to match the bottom width and attach with glue and 1-1/4" brad nails.

Measure and cut the 1x4 front to fit and attach with 1-1/4" brads and glue. Then cut the 1x8 back to fit and attach the same way — the taller back carries the lettering and the hanging rope.

Insert the dividers with glue and 1-1/4" brads to make the three bays. Drill for the rope and hang. Add vinyl or painted lettering. If you add skewer hooks, mind the safety issue — sharp, possibly hot skewers at a reachable station are a hazard, so hang them points-down and out of kids' reach, or skip hooks for a jar.