NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A secretary-desk base cabinet with a center drawer divider, two false-fronted doors, and a jigsaw-cut footer — pairs with the Grant Secretary Hutch.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Divider sides | 2 | 3/4" × 20" × 24" | 3/4" plywood or MDF | ☐ |
| Drawer box divider pieces | 2 | 3/4" × 20" × 14" | 3/4" plywood or MDF | ☐ |
| Bottom shelf | 1 | 3/4" × 20" × 46 1/2" | 3/4" plywood or MDF | ☐ |
| Top | 1 | 3/4" × 20" × 48" | 3/4" plywood or MDF | ☐ |
| Sides | 2 | 3/4" × 20" × 29" | 3/4" plywood or MDF | ☐ |
| Footer blank Mark and jigsaw a decorative profile before attaching. | 1 | 3/4" × 3 1/2" × 46 1/2" | 1x4 | ☐ |
| Back | 1 | 1/4" × 29" × 48" | 1/4" plywood | ☐ |
| Door blanks Cut to fit your actual door openings, leaving 1/16"–1/8" gap. | 2 | 3/4" × 20" × 20" | 3/4" plywood or MDF scrap | ☐ |
| Door applied trim strips Cut to fit each door face — glued on as applied trim, not structural framing. | 8 | 1/4" × 2 1/2" × 20" | 1/4" plywood | ☐ |
| Drawer boxes Size to your openings, leaving 1/2" clearance per side for the drawer slides. | 3 | 3/4" × 7 1/4" × 20" | 3/4" plywood or MDF scrap | ☐ |
| Drawer bottoms Inset to the drawer sides rather than sitting under them. | 3 | 3/4" × 20" × 18" | 3/4" plywood or MDF scrap | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood or MDF, 4x8 sheet | 2 each | ☐ |
| 1x4 board, 4 ft (Pine) | 1 each | ☐ |
| 1/4" plywood, 4x4 sheet | 1 each | ☐ |
| 3/4" wide moulding, 8 ft | 2 each | ☐ |
| Wood screws, 2" (or 1-1/4" pocket-hole screws) | 60 each | ☐ |
| Finish nails, 1-1/4" | 60 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Wood filler | 1 each | ☐ |
| Drawer slides, 18" | 3 set | ☐ |
| Hinges | 2 set | ☐ |
| Knobs | 5 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.