NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Two frameless plywood nightstands cut from a single sheet — no face frame at all, base and cove moulding doing the trim work instead, with a drawer per nightstand.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tops | 2 | 3/4" × 15 3/4" × 30" | 3/4" plywood, full sheet (ripped into 15-3/4" strips) | ☐ |
| Sides | 4 | 3/4" × 15 3/4" × 29 1/4" | 3/4" plywood, full sheet (ripped into 15-3/4" strips) | ☐ |
| Shelves | 4 | 3/4" × 15 3/4" × 28 1/2" | 3/4" plywood, full sheet (ripped into 15-3/4" strips) | ☐ |
| Bottom shelf supports | 4 | 3/4" × 1 1/2" × 28 1/2" | 1x2, 6 ft | ☐ |
| Backs | 2 | 1/4" × 30" × 30" | 1/4" plywood or hardboard, full sheet | ☐ |
| Drawer box sides | 4 | 3/4" × 3 1/2" × 14" | 1x4, 8 ft | ☐ |
| Drawer box front/back | 4 | 3/4" × 3 1/2" × 26" | 1x4, 8 ft | ☐ |
| Drawer bottoms | 2 | 1/4" × 27 1/2" × 14" | 1/4" plywood or hardboard, full sheet | ☐ |
| Drawer faces | 2 | 3/4" × 7 1/4" × 28 3/8" | 1x8, 5 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, full sheet (ripped into 15-3/4" strips) Makes both nightstand carcasses. | 1 each | ☐ |
| 1x2, 6 ft | 2 each | ☐ |
| 1/4" plywood or hardboard, full sheet Both backs and drawer bottoms. | 1 each | ☐ |
| 1x4, 8 ft Both drawer boxes. | 2 each | ☐ |
| 1x8, 5 ft Both drawer faces. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 60 each | ☐ |
| Brad nails, 3/4" and 1-1/4" | 60 each | ☐ |
| Drawer slides, 14", euro style | 2 set | ☐ |
| Knobs or handles | 2 each | ☐ |
| Edge banding | 12 ft | ☐ |
| Base moulding, 4-1/4" | 12 ft | ☐ |
| Cove moulding, for top edge | 12 ft | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.