NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A slatted end-of-bed bench built around two solid 1x12 sides, with a 2x2 corner frame, a plank base shelf, a plank top with a forward lip, and an optional slatted back.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top boards | 6 | 3/4" × 2 1/2" × 37" | Pine 1x3 | ☐ |
| Base boards | 5 | 3/4" × 2 1/2" × 32 3/4" | Pine 1x3 | ☐ |
| Base front board | 1 | 3/4" × 1 1/2" × 32 3/4" | Pine 1x2 | ☐ |
| Side trim and shelf support | 9 | 3/4" × 1 1/2" × 11 1/4" | Pine 1x2 | ☐ |
| Long frame braces | 4 | 1 1/2" × 1 1/2" × 32 3/4" | Pine 2x2 | ☐ |
| Center frame brace | 1 | 1 1/2" × 1 1/2" × 11 1/4" | Pine 2x2 | ☐ |
| Corner posts | 4 | 1 1/2" × 1 1/2" × 17" | Pine 2x2 | ☐ |
| Sides | 2 | 3/4" × 11 1/4" × 17" | Pine 1x12 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x2, 8 ft | 2 each | ☐ |
| Pine, 2x2, 8 ft | 3 each | ☐ |
| Pine, 1x3, 8 ft | 6 each | ☐ |
| Pine, 1x12, 6 ft | 1 each | ☐ |
| 1-1/4" pocket hole screws | 1 box | ☐ |
| 2" finish nails | 1 box | ☐ |
| Optional back slats, thin scrap wood About 1-1/2" x 1/4" strips, evenly spaced. | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.