NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling cabinet that unfolds into a 6-foot-plus cutting table — hinged leaves on both sides, folding legs, and the whole thing from one sheet of plywood.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Cabinet tops/bottoms | 2 | 3/4" × 20" × 32" | Plywood | ☐ |
| Leaves | 2 | 3/4" × 26 3/4" × 32" | Plywood | ☐ |
| Cabinet shelf | 1 | 3/4" × 15 1/2" × 32" | Plywood | ☐ |
| Cabinet sides | 2 | 3/4" × 12" × 32" | Plywood | ☐ |
| Folding legs NOMINAL — measure your assembled cabinet, leaf underside to floor, and cut to that. | 4 | 3/4" × 2 1/2" × 29 1/4" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" sanded, 4x8 sheet The entire cabinet and both leaves. | 1 each | ☐ |
| 1x3, 8 ft The four folding legs. | 2 each | ☐ |
| Caster wheels, 2" ~2-1/2" installed height, with 3/4" pan-head screws. | 4 each | ☐ |
| Hinges, 2-1/2" to 3" Five sets: leaves to cabinet, legs to leaves. | 10 each | ☐ |
| Self-tapping wood screws, #8 x 2" Trim screws work — smaller heads on visible plywood. | 40 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.