Skip to content
Notch
← Back to the plan

Fluted Bathroom Vanity — board plan

What to buy, and which parts come off which board.

Buy 9 boards at 8 ft.

3/4" × 20 1/2"

1 board · 3.1 board feet (includes 15% for knots and defects) · 28% of each board consumed

  1. Board 1 · 69 3/8" left over

    1. Bottom of cabinet — 25 1/2"

3/4" × 19 3/4"

1 board · 8.3 board feet (includes 15% for knots and defects) · 74% of each board consumed

  1. Board 1 · 24 3/4" left over

    1. Sides of Cabinet — 35"
    2. Sides of Cabinet — 35"

3/4" × 12 7/8"

1 board · 3.7 board feet (includes 15% for knots and defects) · 51% of each board consumed

  1. Board 1 · 46 3/4" left over

    1. Doors — 24"
    2. Doors — 24"

3/4" × 4 1/2"

1 board · 1.9 board feet (includes 15% for knots and defects) · 77% of each board consumed

  1. Board 1 · 22 3/8" left over

    1. Baseboard front — 29 1/4"
    2. Baseboard Sides — 21 1/2"
    3. Baseboard Sides — 21 1/2"

3/4" × 3 3/4"

1 board · 0.6 board feet (includes 15% for knots and defects) · 28% of each board consumed

  1. Board 1 · 69 3/8" left over

    1. Fluting detail — 25 1/2"

3/4" × 1 1/2"

2 boards · 1.3 board feet (includes 15% for knots and defects) · 78% of each board consumed

  1. Board 1 · 24 3/4" left over

    1. Face frame sides — 35"
    2. Face frame sides — 35"

  2. Board 2 · 18 1/8" left over

    1. Face frame center — 25 1/2"
    2. Face frame center — 25 1/2"
    3. Face frame center — 25 1/2"

1/4" × 1/2"

1 board · 0.1 board feet (includes 15% for knots and defects) · 79% of each board consumed

  1. Board 1 · 20 3/8" left over

    1. Upper trim front — 30 1/4"
    2. Upper trim sides — 22"
    3. Upper trim sides — 22"

1/4" × 1/4"

1 board · 0.0 board feet (includes 15% for knots and defects) · 4% of each board consumed

  1. Board 1 · 92" left over

    1. Door Trim — 1/4"
    2. Door Trim — 1/4"
    3. Door Trim — 1/4"
    4. Door Trim — 1/4"
    5. Door Trim — 1/4"
    6. Door Trim — 1/4"
    7. Door Trim — 1/4"
    8. Door Trim — 1/4"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.