NotchFarmhouse Table Made with 7 boards
Step-by-step build — 8 steps. Also available as a print sheet.
1Cut wood
Cut the end and side apron pieces.
2Route apron pieces (optional)
Cut a groove into apron pieces 2" from the edge with a router
3Drill pocket holes
Use Kreg Jig to drill pocket holes at both ends of each apron piece.
4Drill pocket holes
Drill pocket holes on the long edges of aprons. These will be for attaching the table top.
5Assemble table frame
Using 2-1/2" pocket screws and wood glue, assemble the table frame.
6Assemble table top
Use wood glue and pocket screws to make table top with the five 8" wide planks.
7Sand and attach table top
Use a belt sander or orbital sander to smooth table top. Attach table top to table from with wood glue and pocket screws.
8Finish!
Paint or stain table as desired!
