NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A chunky 4x4-legged island with two side-mount drawers and an open bottom shelf — real casework scaled for a kitchen, not a small side project.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs (A) | 4 | 3 1/2" × 3 1/2" × 34 1/2" | 4x4 | ☐ |
| Spacers (B) Position differs on each leg — do not treat as interchangeable. | 4 | 3/4" × 2 1/2" × 7 1/2" | 1x4, ripped | ☐ |
| Side aprons (C) | 2 | 3/4" × 7 1/4" × 17" | 1x8 | ☐ |
| Top supports and center divider (D) | 3 | 1 1/2" × 7 1/4" × 21 1/4" | 2x8 | ☐ |
| Bottom supports, outside (E) | 2 | 1 1/2" × 1 1/2" × 17" | 2x2 | ☐ |
| Bottom supports, inside (F) | 2 | 1 1/2" × 1 1/2" × 20" | 2x2 | ☐ |
| Back apron (G) | 1 | 3/4" × 7 1/4" × 51 3/4" | 1x8 | ☐ |
| Bottom front/back supports (H) | 2 | 3/4" × 1 1/2" × 51 3/4" | 1x4, ripped | ☐ |
| Bottom shelf side trim (I) | 2 | 3/4" × 3 1/2" × 17" | 1x4 | ☐ |
| Bottom shelf front/back trim (J) | 2 | 3/4" × 3 1/2" × 51 3/4" | 1x4 | ☐ |
| Bottom shelf Notch the corners to fit around the legs. | 1 | 3/4" × 21 1/2" × 55" | 3/4" plywood | ☐ |
| Front face trim, horizontal (L) | 2 | 3/4" × 1 1/2" × 51 3/4" | 1x4, ripped | ☐ |
| Front face trim, vertical (M) | 3 | 3/4" × 1 1/2" × 4 1/2" | 1x4, ripped | ☐ |
| Top | 1 | 3/4" × 26" × 60 3/4" | 3/4" plywood | ☐ |
| Drawer bottoms (O) | 2 | 3/4" × 19 1/2" × 21 1/8" | 3/4" plywood | ☐ |
| Drawer fronts/backs (P) | 4 | 3/4" × 3 1/2" × 21 1/8" | 1x4 | ☐ |
| Drawer sides (Q) | 4 | 3/4" × 3 1/2" × 21" | 1x4 | ☐ |
| Drawer faces (R) Cut to fit your actual drawer openings. | 2 | 3/4" × 7 1/4" × 25 7/8" | 1x8 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" MDF or plywood, full sheet | 1 each | ☐ |
| 4x4 post, 12 ft (Pine) | 1 each | ☐ |
| 2x8 board, 8 ft (Pine) | 1 each | ☐ |
| 1x8 board, 12 ft (Pine) | 1 each | ☐ |
| 2x2 board, 8 ft (Pine) | 1 each | ☐ |
| 1x4 board, 8 ft (Pine) Ripped down for the spacers and face trim as well as used at full width for the drawer boxes. | 4 each | ☐ |
| Side-mount drawer slides, 21" | 2 pair | ☐ |
| Wood screws, 2" and 3" | 60 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Wood putty | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.