NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A freestanding kitchen island with slatted back paneling, open center shelving, two slatted doors, a top drawer, and a butcher block top on square or turned legs.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Back slats | 16 | 3/4" × 3 1/2" × 33 1/4" | Pine 1x4 | ☐ |
| Back trim Measure the assembled back-slat width first and adjust. | 2 | 3/4" × 3 1/2" × 56" | Pine 1x4 | ☐ |
| Sides | 2 | 3/4" × 11 1/4" × 33 1/4" | Pine 1x12 | ☐ |
| Top and bottom shelf Measure first — cut 1.5" less than the back trim length. | 2 | 3/4" × 11 1/4" × 54 1/2" | Pine 1x12 | ☐ |
| Shelf dividers | 2 | 3/4" × 11 1/4" × 25" | Pine 1x12 | ☐ |
| Side shelves | 2 | 3/4" × 11 1/4" × 18" | Pine 1x12 | ☐ |
| Center shelves Measure the center space to confirm before cutting. | 2 | 3/4" × 11 1/4" × 17" | Pine 1x12 | ☐ |
| Front side trim | 2 | 3/4" × 1 1/2" × 31 3/4" | Pine 1x2 | ☐ |
| Center front trim | 2 | 3/4" × 1 1/2" × 27 3/4" | Pine 1x2 | ☐ |
| Side shelf trim | 2 | 3/4" × 1 1/2" × 16 1/2" | Pine 1x2 | ☐ |
| Center shelf trim Measure first. | 2 | 3/4" × 1 1/2" × 17" | Pine 1x2 | ☐ |
| Drawer trim Measure first. | 1 | 3/4" × 1 1/2" × 56" | Pine 1x2 | ☐ |
| Side trim, legs | 4 | 3/4" × 3 1/2" × 21" | Pine 1x4 | ☐ |
| Legs | 2 | 3 1/2" × 3 1/2" × 33 1/4" | Cedar or hardwood 4x4 | ☐ |
| Back skirting Measure first. | 1 | 3/4" × 3 1/2" × 56" | Pine 1x4 | ☐ |
| Leg support, short | 2 | 3/4" × 3 1/2" × 5 1/2" | Pine 1x4 | ☐ |
| Leg support, long | 2 | 3/4" × 3 1/2" × 7 1/4" | Pine 1x4 | ☐ |
| Top support, front/back | 2 | 3/4" × 3 1/2" × 59" | Pine 1x4 | ☐ |
| Top support, sides | 2 | 3/4" × 3 1/2" × 16" | Pine 1x4 | ☐ |
| Center top support Measure first. | 1 | 3/4" × 1 1/2" × 52" | Pine 1x2 | ☐ |
| Door slats | 10 | 3/4" × 3 1/2" × 25 1/2" | Pine 1x4 | ☐ |
| Door trim Measure first. | 4 | 3/4" × 1 1/2" × 17 1/2" | Pine 1x2 | ☐ |
| Drawer bottom | 1 | 3/4" × 11 1/4" × 50" | Pine 1x12 | ☐ |
| Drawer back | 1 | 3/4" × 3 1/2" × 50" | Pine 1x4 | ☐ |
| Drawer sides | 2 | 3/4" × 3 1/2" × 12 1/4" | Pine 1x4 | ☐ |
| Drawer front Measure first. | 1 | 3/4" × 5 1/2" × 53 3/4" | Pine 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x4, 16 ft | 7 each | ☐ |
| Pine, 1x6, 8 ft | 1 each | ☐ |
| Pine, 1x12, 16 ft | 3 each | ☐ |
| Pine, 1x2, 6 ft | 7 each | ☐ |
| Cedar or hardwood, 4x4, 8 ft Or substitute two turned stair banisters for a dressier look, at significantly higher cost. | 1 each | ☐ |
| Butcher block countertop, 24" x 60" | 1 each | ☐ |
| Door hinges, set | 2 set | ☐ |
| Drawer pulls | 2 each | ☐ |
| Wood screws, assorted | 1 box | ☐ |
| Finish nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.