Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

Farmhouse Console Table (46" Width, Caster Option)

A two-leg-set 2x4 console with scribed X-brace sides and an optional caster base, sized short enough to work as an outdoor grill stand or standard-height sofa table.

Difficulty: Easy
Time: 3–5 hrs plus finish
Cost: $$

Cut list

Part	Qty	T × W × L	Material	✓
Legs Use 24.5" instead if adding 2" casters.	4	1 1/2" × 3 1/2" × 28 1/2"	2x4, 8 ft	☐
Aprons	4	1 1/2" × 1 1/2" × 38"	2x2, 8 ft	☐
Horizontal leg supports	4	1 1/2" × 5 1/2" × 15"	2x6, 8 ft	☐
Bottom slats	6	1 1/2" × 5 1/2" × 15"	2x6, 8 ft	☐
Side X braces Cut to fit; scribe in place. Outside angles about 34°, inside crossing angle about 24°.	4	1 1/2" × 1 1/2" × 20"	2x2, 8 ft	☐
Top support cleats	2	1 1/2" × 3 1/2" × 15"	2x4, 8 ft	☐
Top boards Rip to 9.25" width.	2	1 1/2" × 9 1/4" × 46"	2x10, 8 ft	☐

Materials

Item	Qty	✓
2x4, 8 ft	2 each	☐
2x2, 8 ft	3 each	☐
2x6, 8 ft	2 each	☐
2x10, 8 ft	1 each	☐
Casters, 2 in (optional)	4 each	☐
Pocket hole screws, 2-1/2", or self-tapping wood screws	60 each	☐
Brad nails, 2"	20 each	☐
Wood glue	3 oz	☐
Primer and paint, or stain and poly	1 set	☐

Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.