NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A queen-size farmhouse bed built on tall 4x4 corner posts sized to carry an added canopy frame, with a plywood-panel headboard and footboard and a center-supported slat platform.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Headboard legs | 2 | 3 1/2" × 3 1/2" × 80" | Pine 4x4 | ☐ |
| Headboard rails | 2 | 1 1/2" × 3 1/2" × 60" | Pine 2x4 | ☐ |
| Headboard panel | 1 | 3/4" × 30" × 60" | Plywood, 3/4" | ☐ |
| Headboard top trim | 1 | 3/4" × 3 1/2" × 60" | Pine 1x4 | ☐ |
| Footboard legs | 2 | 3 1/2" × 3 1/2" × 80" | Pine 4x4 | ☐ |
| Footboard rails | 2 | 1 1/2" × 3 1/2" × 60" | Pine 2x4 | ☐ |
| Footboard panel | 1 | 3/4" × 15" × 60" | Plywood, 3/4" | ☐ |
| Footboard trim | 2 | 3/4" × 3 1/2" × 60" | Pine 1x4 | ☐ |
| Siderails | 2 | 1 1/2" × 9 1/4" × 80" | Pine 2x10 | ☐ |
| Siderail top rails | 2 | 1 1/2" × 3 1/2" × 80" | Pine 2x4 | ☐ |
| Slat cleats | 3 | 1 1/2" × 3 1/2" × 83" | Pine 2x4 | ☐ |
| Slat center legs | 4 | 1 1/2" × 3 1/2" × 15" | Pine 2x4 | ☐ |
| Slat top tie-in | 1 | 1 1/2" × 3 1/2" × 60" | Pine 2x4 | ☐ |
| Mattress slats | 21 | 3/4" × 3 1/2" × 31" | Pine 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 4x4, 8 ft | 4 each | ☐ |
| Pine, 2x4, 12 ft Increased from the source's 5-board estimate — 5 boards run about 4 ft short of the total 2x4 length this plan actually needs. | 6 each | ☐ |
| Pine, 2x10, 8 ft | 2 each | ☐ |
| Pine, 1x4, 6 ft | 3 each | ☐ |
| Pine, 1x4, 8 ft | 7 each | ☐ |
| Plywood, 3/4", 4x8 sheet | 1 each | ☐ |
| Pocket hole screws, 1-1/2" and 2-1/2" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Primer and paint, or stain and finish | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.