NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A tall plywood shelf tower for a closet system — adjustable shelves, a face frame, and baseboard trim so it reads built-in, not boxy.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 15 3/4" × 72" | 3/4" plywood | ☐ |
| Shelves, top and bottom Trim adjustable shelves down ~1/4" in width and depth for banding and pin clearance. | 6 | 3/4" × 15 3/4" × 22 1/2" | 3/4" plywood | ☐ |
| Back | 1 | 1/4" × 24" × 72" | 1/4" plywood | ☐ |
| Face frame top | 1 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Face frame stiles | 2 | 3/4" × 1 1/2" × 71 1/4" | 1x2 | ☐ |
| Face frame bottom | 1 | 3/4" × 1 1/2" × 21" | 1x2 | ☐ |
| Header | 1 | 3/4" × 3 1/2" × 21" | 1x4 | ☐ |
| Base frame front/back Optional; height matches baseboard. | 2 | 1 1/2" × 1 1/2" × 21" | 2x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood Cut into three 15-3/4" wide x 8-ft strips. More if you want additional shelving beyond the tower. | 1 sheet | ☐ |
| 1/4" plywood Back — needed if shelves are adjustable, to keep the tower from splaying. | 1 sheet | ☐ |
| 1x2, 8 ft (Poplar) Face frame. | 2 each | ☐ |
| 1x4, 2 ft (Pine) Header. | 1 each | ☐ |
| 2x2, 8 ft (Pine) Optional base frame. | 1 each | ☐ |
| Base moulding Match the closet's existing baseboard. | 6 linear ft | ☐ |
| 3/4" x 3/4" inside corner moulding Optional header trim. | 4 linear ft | ☐ |
| Plywood edge banding | 1 roll | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Brad nails, 1-1/4" and 3/4" | 1 box | ☐ |
| Shelf pins | 16 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Finish / paint | 1 kit | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.