NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A near-8-foot plywood buffet — three drawers and two doors behind a separately-built face frame, a planked solid-wood top, and shelving on either side.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top and bottom | 2 | 3/4" × 15 3/4" × 88" | 3/4" plywood, sheets ripped to 15-3/4" strips | ☐ |
| Sides | 2 | 3/4" × 15 3/4" × 39 1/2" | 3/4" plywood, sheets ripped to 15-3/4" strips | ☐ |
| Dividers | 2 | 3/4" × 15 3/4" × 34" | 3/4" plywood, sheets ripped to 15-3/4" strips | ☐ |
| Back | 1 | 1/4" × 89 1/2" × 39 1/2" | 1/4" plywood or hardboard, for the back | ☐ |
| Face frame top | 1 | 3/4" × 2 1/2" × 89 1/2" | 1x3, 8 ft | ☐ |
| Face frame bottom | 1 | 3/4" × 5 1/2" × 89 1/2" | 1x6, 8 ft | ☐ |
| Face frame stiles | 4 | 3/4" × 2 1/2" × 31 1/2" | 1x3, 8 ft | ☐ |
| Face frame drawer trim | 2 | 3/4" × 1 1/2" × 33 1/2" | 1x2, 8 ft | ☐ |
| Top planking | 5 | 3/4" × 3 1/2" × 91" | 1x4, 8 ft | ☐ |
| Shelves | 4 | 3/4" × 15 3/4" × 26 1/2" | 3/4" plywood, sheets ripped to 15-3/4" strips | ☐ |
| Drawer sides Measure your slide clearance before final cut. | 6 | 3/4" × 7 1/4" × 14" | 1x8, 8 ft | ☐ |
| Drawer front/back | 6 | 3/4" × 7 1/4" × 31" | 1x8, 8 ft | ☐ |
| Drawer bottoms | 3 | 1/4" × 12 1/2" × 31" | 1/4" plywood or hardboard, for the back | ☐ |
| Drawer faces | 3 | 3/4" × 9 1/4" × 33 1/4" | 1x10, 10 ft | ☐ |
| Door frames Sized to your actual door openings — measure and cut to fit. | 2 | 3/4" × 3 1/2" × 34" | 1x4, 8 ft | ☐ |
| Door panels Sized to fit your assembled door frames. | 2 | 1/2" × 25" × 28" | 1/2" plywood, for door panels | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, sheets ripped to 15-3/4" strips | 2 sheet | ☐ |
| 1/4" plywood or hardboard, for the back | 1 each | ☐ |
| 1x3, 8 ft Face frame. | 3 each | ☐ |
| 1x6, 8 ft Face frame bottom. | 1 each | ☐ |
| 1x2, 8 ft Face frame drawer trim. | 1 each | ☐ |
| 1x4, 8 ft Includes stock for the doors. | 8 each | ☐ |
| 1x8, 8 ft Drawer sides, front, back. | 3 each | ☐ |
| 1x10, 10 ft Drawer faces. | 1 each | ☐ |
| 1/2" plywood, for door panels | 1 each | ☐ |
| Inset hinges | 4 each | ☐ |
| Drawer slides, 14" | 3 set | ☐ |
| Handles | 3 each | ☐ |
| Knobs | 2 each | ☐ |
| Base moulding, 4-1/4" | 12 ft | ☐ |
| Top edge moulding, 3/4" | 12 ft | ☐ |
| Magnetic door catches | 2 each | ☐ |
| Pocket hole screws, 1-1/4" | 100 each | ☐ |
| Finish nails, 1-1/4" |
| 80 each |
| ☐ |
| Wood glue | 6 oz | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.