NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Sit down, take your boots off, put them underneath. Painted poplar over a plywood carcass.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 15" × 17 1/4" | Birch Plywood | ☐ |
| Dividers Creates three cubbies. Each ends up ~14" wide — enough for a pair of boots. | 2 | 3/4" × 15" × 17 1/4" | Birch Plywood | ☐ |
| Bottom | 1 | 3/4" × 15" × 46 1/2" | Birch Plywood | ☐ |
| Back Full-thickness back. Racking resistance. | 1 | 3/4" × 17 1/4" × 46 1/2" | Birch Plywood | ☐ |
| Seat Glued up from narrower boards. Overhangs 1" front and sides. | 1 | 1 1/2" × 16 1/2" × 49" | Poplar | ☐ |
| Face frame stiles | 2 | 3/4" × 1 1/2" × 17 1/4" | Poplar | ☐ |
| Face frame rails | 2 | 3/4" × 1 1/2" × 45" | Poplar | ☐ |
| Toe kick | 1 | 3/4" × 3 1/2" × 46 1/2" | Poplar | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Birch plywood, 3/4", 4x8 Cabinet-grade. Construction ply has voids that show as holes in your edges. | 1.5 sheet | ☐ |
| Poplar, 4/4, for the face frame (Poplar) | 8 board feet | ☐ |
| Poplar, 8/4, for the seat (Poplar) Solid and thick. The seat carries the load. | 6 board feet | ☐ |
| Pocket hole screws, 1-1/4" | 60 each | ☐ |
| Wood glue | 8 oz | ☐ |
| Primer + latex enamel paint Enamel, not wall paint. This surface gets kicked by boots. | 32 oz | ☐ |
| Wood filler | 8 oz | ☐ |
| Sandpaper, assorted grits | 12 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.