NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A two-column cubby locker with a dedicated mail-sorting shelf — built from a single supply run of 1x12s, sized to be repeated side by side.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 11 1/4" × 76" | 1x12 | ☐ |
| Center cubby divider | 1 | 3/4" × 11 1/4" × 76" | 1x12 | ☐ |
| Shelves Two shelves per cubby column. | 4 | 3/4" × 11 1/4" × 14" | 1x12 | ☐ |
| Top | 1 | 3/4" × 11 1/4" × 30" | 1x12 | ☐ |
| Back | 1 | 1/4" × 30" × 76" | 1/4" plywood | ☐ |
| Mail-sort dividers Small vertical dividers screwed to the mail-sort shelf. | 5 | 3/4" × 3 1/2" × 4" | 1x4 | ☐ |
| Top trim | 1 | 3/4" × 1 1/2" × 30 1/2" | 1x2 | ☐ |
| Side trim | 2 | 3/4" × 1 1/2" × 76 1/2" | 1x2 | ☐ |
| Shelf trim | 4 | 3/4" × 1 1/2" × 14 1/4" | 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12 board, 8 ft (Pine) | 4 each | ☐ |
| 1x2 board, 8 ft (Pine) | 3 each | ☐ |
| 1/4" plywood, full sheet | 1 each | ☐ |
| 1x4 board, 30 in (Pine) Cut into the small mail-sort dividers. | 1 each | ☐ |
| Wood screws, 2" | 30 each | ☐ |
| Finish nails, 2" and 1-1/4" | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Wood filler and finishing supplies (paint, primer, 120-grit sandpaper) | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.