NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-mounted grid of 5" x 10" cubbies for hats, gloves, and small accessories — a nested inner grid built separately, then dropped into an outer frame.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Outer frame sides | 2 | 3/4" × 5 1/2" × 40" | Pine | ☐ |
| Outer frame top and bottom | 2 | 3/4" × 5 1/2" × 30" | Pine | ☐ |
| Vertical dividers | 1 | 3/4" × 5 1/2" × 30" | Pine | ☐ |
| Horizontal shelves | 2 | 3/4" × 5 1/2" × 30" | Pine | ☐ |
| Back panel | 1 | 1/4" × 30" × 40" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x6, assorted lengths Cross-cut to length from 1x6 stock for every part — sides, top, bottom, dividers, and shelves. | 24 ft | ☐ |
| Plywood, 1/4", quarter sheet Back panel. | 1 each | ☐ |
| Brad nails, 1-1/4" and 5/8" | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
| Wall mounting screws Length depends on your attachment method — studs, cleat, or adjacent cabinet. | 1 box | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.