NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling 2x4 workbench with three open shelves sized for lumber storage, a plywood top, and an optional enclosed front.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side frame top/bottom rails | 2 | 1 1/2" × 3 1/2" × 51" | 2x4 | ☐ |
| Side frame short uprights | 2 | 1 1/2" × 3 1/2" × 30" | 2x4 | ☐ |
| Side frame mid uprights | 2 | 1 1/2" × 3 1/2" × 32" | 2x4 | ☐ |
| Side frame tall uprights | 2 | 1 1/2" × 3 1/2" × 34" | 2x4 | ☐ |
| Side frame cross supports | 4 | 1 1/2" × 3 1/2" × 28" | 2x4 | ☐ |
| Frame connectors Joins the two side frames into the overall bench frame. | 6 | 1 1/2" × 3 1/2" × 64" | 2x4 | ☐ |
| Shelving Can be narrowed to 24" to conserve material, or slatted with 1x3 boards cut to 72" instead. | 3 | 1/2" × 28" × 72" | 1/2" plywood or OSB | ☐ |
| Front panel Optional — omit for open shelving, adding cross bracing instead. | 1 | 1/4" × 38" × 72" | 1/4" plywood | ☐ |
| Tabletop | 1 | 3/4" × 31" × 72" | 3/4" plywood | ☐ |
| Backsplash | 1 | 1/4" × 14 1/2" × 72" | Pegboard or plywood scrap | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4 board, 8 ft (Pine) | 8 each | ☐ |
| 1/2" plywood or OSB, 4x8 sheet 1x3 boards can substitute for slatted shelving instead. | 2 each | ☐ |
| 1/4" plywood, 4x8 sheet Optional enclosed front — omit for open shelving. | 1 each | ☐ |
| 3/4" plywood, 4x8 sheet The tabletop. | 1 each | ☐ |
| Pegboard or plywood scrap, for the backsplash | 1 each | ☐ |
| Caster wheels | 4 each | ☐ |
| Pocket-hole screws, 2-1/2" | 60 each | ☐ |
| Finish nails, 1-1/4" | 60 each | ☐ |
| Wood screws, 2" | 30 each | ☐ |
| Wood glue | 8 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.