Notch- Difficulty
- Beginner
- Time
- 1.8–3.3 hours
- Cost
- $$
About this build
Sometimes simple can be perfectly stated. Not only is this coat rack affordable to create, but it is the perfect project for beginners!
Tools
Essential
- Drill / Driver
- Miter Saw
- Pocket Hole Jig
- Random Orbit Sander
Materials
| Item | Qty |
|---|---|
| Board, 1x4 72" | 1 board |
| Coat Hangers | 4 each |
| Wall Hangers | 2 each |
| 1 1/4" Pocket Hole Screws | 8 each |
| Wood Stain | 1 each |
Overall cost: $$. Lumber prices vary by region, species, and season, so we give a band rather than a figure we would only be pretending to know.
Cut list
| Part | Qty | T × W × L |
|---|---|---|
| Boards | 3 | 3/4" × 3" × 23" |
What to buy
Buy 1 board at 8 ft.
3/4" × 3"
1 board
Assumes 8 ft stock, a 1/8" saw kerf, and buying each part at its own width. Change the board size or kerf on the full board plan →
Instructions
1Check Dimensions
Check the dimensions before starting to make sure that the piece will fit in your space. For a video tutorial showing the steps to this project, visit the "Extras" tab for the link to the YouTube video.
2Cut Your Boards
Cut three 23 1/2" slats from your 72" common board.
3Join The Boards
Join the three boards using pocket holes, wood glue, and 1 1/4" screws.
4Sand & Stain
Sand & stain your piece.
5Add Hardware
Add hooks to the front of the boards for hanging coats, and hooks on the back for attaching the coat rack to the wall.
Tags
- Entryway
- Beginner
Reviews & builds
No reviews yet
Sign in to review this plan or share your build.
No reviews yet. Be the first to build this.